See other bills
under the
same topic
PRINTER'S NO. 237
THE GENERAL ASSEMBLY OF PENNSYLVANIA
HOUSE BILL
No.
266
Session of
2021
INTRODUCED BY JAMES, R. BROWN, DIAMOND, JOZWIAK, MOUL, NEILSON,
SAYLOR, SMITH, STAMBAUGH, WHEELAND AND ZIMMERMAN,
JANUARY 26, 2021
REFERRED TO COMMITTEE ON ENVIRONMENTAL RESOURCES AND ENERGY,
JANUARY 26, 2021
AN ACT
Amending the act of November 23, 2010 (P.L.1083, No.108),
entitled "An act establishing a recycling program for certain
covered devices; imposing duties on manufacturers and
retailers of certain covered devices; providing for the
powers and duties of the Department of Environmental
Protection and for enforcement; establishing the Electronic
Materials Recycling Account in the General Fund; and
prescribing penalties," in preliminary provisions, further
providing for definitions.
The General Assembly of the Commonwealth of Pennsylvania
hereby enacts as follows:
Section 1. The definitions of "covered device" and
"manufacturer" in section 102 of the act of November 23, 2010
(P.L.1083, No.108), known as the Covered Device Recycling Act,
are amended and the section is amended by adding definitions to
read:
Section 102. Definitions.
The following words and phrases when used in this act shall
have the meanings given to them in this section unless the
context clearly indicates otherwise:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
* * *
"Covered device." A covered computer device [and], covered
television device and photovoltaic module marketed and intended
for use by a consumer. The term does not include:
(1) a device that is a part of a motor vehicle or any
component part of a motor vehicle assembled by or for a
vehicle manufacturer or franchised dealer, including
replacement parts for use in a motor vehicle;
(2) a device that is functionally or physically a part
of or connected to or integrated within equipment or a system
designed and intended for use in an industrial, governmental,
commercial, research and development or medical setting,
including, but not limited to, diagnostic, monitoring,
control or medical products as defined under the Federal
Food, Drug, and Cosmetic Act (52 Stat. 1040, 21 U.S.C. ยง 301
et seq.), or equipment used for security, sensing,
monitoring, antiterrorism, emergency services purposes or
equipment designed and intended primarily for use by
professional users;
(3) a device that is contained within a clothes washer,
clothes dryer, refrigerator, refrigerator and freezer,
microwave oven, conventional oven or range, dishwasher, room
air conditioner, dehumidifier, air purifier or exercise
equipment; or
(4) any of the following:
(i) Telephone of any type, including a mobile phone.
(ii) Personal digital assistant.
(iii) Global positioning system.
* * *
"Manufacturer." A computer manufacturer [or], a television
20210HB0266PN0237 - 2 -
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
manufacturer or a photovoltaic module manufacturer.
* * *
"Photovoltaic module." The smallest nondivisible,
environmentally protected assembly of photovoltaic cells or
other photovoltaic collector technology and ancillary parts
intended to generate electrical power under sunlight. The term
does not include a photovoltaic cell that is part of a consumer
electronic device for which the photovoltaic cell provides
electricity needed to make the consumer electronic device
function. The term includes, but is not limited to,
interconnections, terminal and protective devices such as diodes
that are:
(1) installed on, connected to or integral with
buildings; or
(2) used as components of freestanding, off-grid, power
generation systems, including, but not limited to, powered
water pumping stations, electric vehicle charging stations,
fencing, street and signage lights and other commercial or
agricultural purposes.
"Photovoltaic module manufacturer." A person:
(1) who manufactures photovoltaic modules to be sold
under its own brand as identified by its own brand label;
(2) who sells photovoltaic modules manufactured by
others under its own brand as identified by its own brand
label; or
(3) who assumes the duties imposed on the photovoltaic
module manufacturer under this act.
* * *
Section 2. This act shall take effect in 60 days.
20210HB0266PN0237 - 3 -
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29