H1808B2466A06128 AJB:JMT 06/09/20 #90 A06128
AMENDMENTS TO HOUSE BILL NO. 1808
Sponsor: REPRESENTATIVE MACKENZIE
Printer's No. 2466
Amend Bill, page 2, line 17, by striking out ""residual
waste,""
Amend Bill, page 2, lines 18 and 19, by striking out ",
amended February 15, 2018 (P.L.19, No.7),"
Amend Bill, page 2, by inserting between lines 25 and 26
"Advanced recycling." A manufacturing process for the
conversion of post-use polymers through processes, including
pyrolysis, gasification, depolymerization, catalytic cracking,
reforming, hydrogenation and other similar technologies, into
any of the following:
(1) Basic hydrocarbon raw materials, feedstocks,
chemicals, liquid fuels, waxes and lubricants.
(2) Other products, including, but not limited to,
monomers, oligomers, plastics, crude oil, naphtha , liquid
transportation fuels and other basic hydrocarbons.
"Advanced recycling facility." A manufacturing facility that
receives post-use polymers and separates, stores and converts
the post-use polymers using advanced recycling. The term does
not include a resource recovery facility, processing facility,
municipal waste processing or disposal facility or any other
facility that receives unsorted municipal waste for the purpose
of separating out post-use polymers for use in advanced
recycling.
* * *
Amend Bill, page 2, line 30; page 3, lines 1 through 16; by
striking out all of said lines on said pages
Amend Bill, page 3, lines 25 and 26, by striking out "or
recoverable feedstocks where these materials" and inserting
that
Amend Bill, page 3, line 27, by striking out "pyrolysis or
2020/90AJB/HB1808A06128 - 1 -
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
gasification" and inserting
advanced recycling
Amend Bill, page 3, lines 29 and 30; page 4, lines 1 through
13; by striking out all of said lines on said pages and
inserting
"Post-use polymers." Post-use plastic derived from any
residential, municipal or commercial source that would not
otherwise be recycled, including source-separated recyclable
plastics from a materials recycling facility, that is not mixed
with solid waste, municipal waste, residual waste, regulated
medical and chemotherapeutic waste, hazardous waste, electronic
waste, waste tires or construction or demolition waste and may
contain incidental contaminants or impurities, such as paper
labels or metal rings. For the purpose of this act, post-use
polymers that are converted using advanced recycling shall not
be considered solid waste, municipal waste or residual waste.
Amend Bill, page 4, lines 28 through 30; page 5, lines 1
through 30; page 6, lines 1 through 29; by striking out all of
said lines on said pages and inserting
(ii) The conversion of post-use polymers through
advanced recycling in which the manufacturing activities,
handling of the post-use polymers at an advanced
recycling facility and the products and by-products of
the advanced recycling conversion comply with all
applicable Environmental Protection Agency and department
rules and regulations.
Amend Bill, page 7, lines 9 through 11, by striking out all
of said lines
Amend Bill, page 7, lines 21 through 23, by striking out "the
conversion of post" in line 21 and all of lines 22 and 23 and
inserting
the conversion of post-use polymers through advanced
recycling in which the manufacturing activities, handling of the
post-use polymers at an advanced recycling facility and the
products and by-products of the advanced recycling conversion
comply with all applicable Environmental Protection Agency and
department rules and regulations.
2020/90AJB/HB1808A06128 - 2 -
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37